OPERATION
HCS-3020 4020
18
X7702243800
© 3/2016 ECHO Inc.
Two Stroke Oil
- A two-stroke engine oil meeting ISO-L-EGD (ISO/CD 13738)
and J.A.S.O. FD Standards must be used. Echo brand premium Power Blend
X
™
Universal 2-Stroke Oil meets these standards. Engine problems due to
inadequate lubrication caused by failure to use an ISO-L-EGD (ISO/CD 13738)
and J.A.S.O. M345-FD certified oil, such as Echo premium Power Blend X
™
,
will void the two-stroke engine warranty.
Echo premium Power Blend X
™
Universal 2-Stroke Oil may be mixed at
50:1 ratio for application in all Echo engines sold in the past regardless
of ratio specified in those manuals.
Handling Fuel
Fuel is VERY flammable. Use extreme care when mixing, storing or
handling, or serious personal injury may result.
◆
Use an approved fuel container.
◆
DO NOT smoke near fuel.
◆
DO NOT allow flames or sparks near fuel.
◆
Fuel tanks/cans may be under pressure. Always loosen fuel
caps slowly allowing pressure to equalize.
◆
NEVER refuel a unit when the engine is HOT or RUNNING!
◆
DO NOT fill fuel tanks indoors. ALWAYS fill fuel tanks
outdoors over bare ground.
◆
DO NOT overfill fuel tank. Wipe up spills immediately.
◆
Securely tighten fuel tank cap and close fuel container after
refueling.
◆
Inspect for fuel leakage. If fuel leakage is found, do not start or
operate unit until leakage is repaired.
◆
Move at least 3 m (10 ft.) from refueling location before
starting the engine.
Mixing Instructions
1.
Fill an approved fuel container
with half of the required amount of
gasoline.
2.
Add the proper amount of 2-stroke
oil to gasoline.
3.
Close container and shake to mix
oil with gasoline.
4.
Add remaining gasoline, close fuel
container, and remix.
Fuel to Oil Mix – 50:1 Ratio
US
Metric
Gas
Oil
Gas
Oil
Gallons
Oz.
Liter
CC.
1
2.6
5
100
2
5.2
10
200
5
13
25
500