background image

ECHO, inCOrPOraTED

400 O

akwOOd

 R

Oad

L

ake

 Z

uRich

, iL  60047

www.echo-usa.com

COnSUMEr PrODUCT

SUPPOrT

1-800-673-1558

8:30 - 4:30 Mon - Fri C.S.T.

dealer?  

c

all

1-800-432-echo

1-800-432-3246

or

www

.

echo

-

usa

.

com

s

ervIcIng

 I

nformatIon

parts

/

serIal

 

number

 

Genuine ECHO Parts and ECHO REPOWER™ Parts and Assemblies 

for your ECHO products are available only from an Authorized ECHO 

Dealer.  When you do need to buy parts 

always

 have the Model Num-

ber, Type and Serial Number of the unit with you.  You can find these 

numbers on the engine housing.  For future reference, write them in the 

space provided below. 

Model No. _________________SN. ___________________

servIce

Service of this product during the warranty period must be performed 

by an Authorized ECHO Service Dealer.  For the name and address of 

the Authorized ECHO Service Dealer nearest you, ask your retailer or 

call: 1-800-432-ECHO (3246)

  Dealer information is also available on 

our Web Site. When presenting your unit for Warranty service/repairs, 

proof of purchase is required.

echo

 

consumer

 

product

 

support

If you require assistance or have questions concerning the applica-

tion, operation or maintenance of this product you may call the ECHO 

Consumer Product Support Department at 1-800-673-1558 from 8:30 

am to 4:30 pm (Central Standard Time) Monday through Friday. Before 

calling, please know the model and serial number of your unit.

warranty

 

regIstratIon

 

To ensure trouble free warranty coverage it is important that you regis-

ter your ECHO equipment on-line at www.echo-usa.com

 or by filling 

out the warranty registration card supplied with your unit. Registering 

your product confirms your warranty coverage and provides a direct 

link between you and ECHO if we find it necessary to contact you.

addItIonal

 

or

 

replacement

 

manuals

 

Replacement Operator, safety Manuals, and Parts Catalogs

 are available from your ECHO dealer or at www.echo-

usa.com or by contacting ECHO Inc., 400 Oakwood Road, Lake Zurich, IL 60047 (800-673-1558). Always check the 

ECHO Web Site for updated information.

safety Videos 

are available from your Echo dealer. A $5.00 shipping charge will be required for each video.

S84913001059/S84913999999

Summary of Contents for HCA-265

































Reviews: