Echo HCA-2620, Operator'S Manual, Page: 16 / 48

CONTENTS HCA-2620
16 X7502342200
© 5/2017 ECHO Inc.
CONTENTS
The ECHO product you purchased has been factory pre-assembled for your
convenience. Due to packaging restrictions, some assembly may be
necessary.
After opening the carton, check for damage. Immediately notify your retailer
or ECHO Dealer of damaged or missing parts. Use the contents list to check
for missing parts.
ASSEMBLY
Gear Housing Assembly / Drive Shaft
Hedge Trimmer Blades are very sharp. Wear gloves to protect
hands.
1. Remove locating bolt (A)
and loosen clamping bolt
(B).
2. Remove vinyl cap from drive
shaft.
3. Slide Gear Housing
Assembly onto Drive Shaft.
Be certain the Flex Drive
Shaft engages the hole in
Driver Gear.
4. Align locating hole in gear housing with locator hole in drive shaft.
5. Install locating bolt (A). Tighten clamping bolt (B).
1 Power Head / Drive Shaft Assembly
1 Gear case Assembly
1 Operator's manual
1 Safety Manual
1 Warranty Statement
Shoulder Harness
1 Blade Cover
B
A