12
STARTING
WARM
ENGINE
The starting procedure is the same as Cold Start, except DO NOT close
the choke.
WARNING
DANGER
The blades should not move at idle. If blades move, readjust
carburetor according to "Carburetor Adjustment" instructions in
this manual or see your ECHO Dealer, otherwise serious personal
injury may result.
1. Stop Switch
Move stop switch (A) forward, away from the STOP position.
2. Recoil Starter
Place the hedge clipper on a flat clear area. Grip the front handle (B)
securely with one hand, and pull the recoil starter handle (C) until
engine fires.
NOTE
If engine does not start after 5 pulls, use Cold Start Procedure.
STOPPING
ENGINE
1. Throttle Trigger
Release throttle trigger, and allow engine to return to idle.
2. Stop Switch
Move stop switch (A) back to STOP position.
WARNING
DANGER
If engine does not stop when stop switch is moved to STOP
position, move choke lever up to Cold Start position to stall engine.
Have your ECHO dealer repair stop switch before using hedge
clipper again.
A
A
C
B
