H
EDGE
C
LIPPER
O
PERATOR
'
S
M
ANUAL
9
NOTE
For normal cutting, Echo strongly recommends the blade stiffener
be installed. In extreme conditions, such as commercial cutting, or
when cutting thick and/or dense branches, efficiency may be
increased by trimming without the blade stiffener.
Tools required: (2) 10 mm Sockets & Extensions
Parts Required: Blade Stiffener, Blade Lock Nuts (3) (P/N
43302206460), Washers (3)
WARNING
DANGER
Hedge Clipper blades are very sharp. Touching them may lead to
severe personal injury. Avoid touching blades whenever possible,
and always wear gloves to protect hands.
IMPORTANT
Follow blade bolt adjustment instructions exactly. Failure to do so
could result in damage to blades or gearbox.
INSTALL
BLADE
STIFFENER
1. Move stop switch to stop position.
2. Disconnect spark plug wire.
C
ONTENTS
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing
parts. Use the contents list to check for missing parts.
__ 1 - Hedge Clipper Assembly
__ 1 - Operator’s Manual
__ 1 - Safety Manual
__ 1 - Warranty Statement
__ 1 - Warranty Registration Card
__ 1 - T-Wrench 13 x 19
__ 1 - Blade Stiffener
__ 3 - Blade Locknuts
__ 3 - Stiffener Washers
__ 1 - Echo Power Blend
TM
2-stroke oil sample
__ 1 - Blade Cover
A
SSEMBLY
