background image

4

Symbol

description/application

Symbol form/shape

Symbol

description/application

Symbol form/shape

Hot

Surface

Carburetor adjustment

- Idle speed

Carburetor adjustment

- High speed mixture

Symbol

description/application

Symbol form/shape

Symbol

description/application

Symbol form/shape

Read and understand

owners manual.

Wear eyes, ears and

head protection

Emergency stop

Fuel and oil mixture

Finger Severing

Carburetor   adjustment

- Low speed mixture

Safety/Alert

Avoid all power

lines. This unit is not

insulated against

electrical current.

Do not operate clos-

er than 15 M (50 ft.)

from electrical haz-

ards.

Plan retreat path

from falling

objects.

Wear hand protec-

tion. Use two handed.

DO NOT smoke

near fuel.

DO NOT allow

flames or sparks

near fuel.

Wear slip resistant

foot wear.

Ignition

Ignition

ON/OFF

Do not operate
without guards

in place.

Keep bystanders at least

4.5 meters (15 feet) away.

Primer bulb

INTERNATIONAL

 

SYMBOLS

Choke Control

"Cold Start"

Position

(Choke Closed)

Choke Control

"Run"

Position

(Choke Open)

S

AFETY

 I

NSTRUCTIONS

PERSONAL

 

CONDITION

 

AND

 

SAFETY

 

EQUIPMENT

WARNING  

  DANGER

Users of this product risk injury to themselves and others if the unit is used improperly and/or safety precautions
are not followed.  Proper clothing and safety gear must be worn when operating unit.

Physical Condition

Your judgment and physical dexterity may not be good:
• if you are tired or sick,
• if you are taking medication,
• if you have taken alcohol or drugs.
Operate unit only if you are physically and mentally well.

Eye Protection

Wear eye protection that meets ANSI Z87.1 or CE
requirements whenever you operate the unit.

Hand Protection

Wear no-slip, heavy-duty work gloves to improve your
grip on the handle.  Gloves also reduce the transmission
of machine vibration to your hands.

Hearing Protection

ECHO recommends wearing hearing protection whenever
unit is used.

Proper Clothing

Wear snug fitting, durable clothing;
• Pants should have long legs, shirts with long sleeves.
• DO NOT WEAR SHORTS,
• DO NOT WEAR TIES, SCARVES, and JEWELRY.
Wear sturdy work shoes with nonskid soles:
• DO NOT WEAR OPEN TOED SHOES,
• DO NOT OPERATE UNIT BAREFOOTED.

Keep long hair away from engine and blower intake.
Retain hair with cap or net.

Hot Humid Weather

Heavy protective clothing can increase operator fatigue,
which may lead to heat stroke. Schedule heavy work for
early morning or late afternoon hours when temperatures
are cooler.

Summary of Contents for HC-150 - SERIAL NUMBER 05001001-05999999

























Reviews: