Echo GT-200R, Operator'S Manual

Page: 7 / 24

G
RASS
T
RIMMER
O
PERATOR
'
S
M
ANUAL
7
CONTENTS LIST
____ - Trimmer Assembly:
____ - Power Head
____ - Drive Shaft Assembly
____ - Plastic Bag (Co-Pack)
____ - Operator's Manual
____ - Safety Manual
____ - Warranty Card & Limited Warranty
____ - Locking Tool, P/N 89751801131 (head locking tool)
____ - Safety Glasses
____ - Echo Power Blend TM 2-stroke oil sample
____ - 12 pcs. 8 in. x .080 Pre-cut Nylon Line
* __
- Rapid Loader
TM
2-line Head
* __
- Shield Assembly
* __
- Line Head Mounting Hardware:
* ___ - 3/8-24 Locknut
* ___ - Small Washer
* ___ - Large Washer
* ___ - Locking Tool, P/N 89751801131 (wrench handle)
* ___ - Wrench 17 x 14.5, P/N X602000031
PRODUCT EMISSION DURABILITY
The 300 hour emission durability compliance period is the time span selected by the manufacturer certifying the
engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures
are followed as listed in the Maintenance Section of this manual.
An Emission Control Label is located on the engine. (This is an
EXAMPLE ONLY, information on label varies by engine FAMILY).
IMPORTANT ENGINE INFORMATION
ENGINE FAMILY: 3EHXS.0214EA DISPLACEMENT: 21.2
CC
EMISSION COMPLIANCE PERIOD : 300 HRS.
THIS ENGINE MEETS U.S. EPA PHASE 2 EMISSION
REGULATIONS FOR SMALL NONROAD ENGINES. REFER TO
OWNER'S MANUAL FOR MAINTENANCE SPECIFICATIONS
AND ADJUSTMENTS.
E
MISSION
C
ONTROL
EPA Phase 2
The emission control system for this engine is EM (Engine
Modification ).
D
ESCRIPTION
The ECHO product you purchased has been partially assembled for your convenience. Due to packaging restrictions,
installation of the plastic debris shield, nylon line head, and positioning of the front handle are necessary.
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing
parts. Use the contents list to check for missing parts.
*
Some units may be factory pre-assembled. No assembly tools are needed and the nylon line head, plastic debris shield,
and mounting hardware, shown in the contents list, are pre-assembled to the unit. Only the front handle may need to be
re-positioned for comfortable operation.
*