![background image](http://html1.mh-extra.com/html/echo/edr-2100/edr-2100_operators-manual_3899481013.webp)
12
MAINTENANCE
AIR FILTER
•
Clean before Use.
- Remove air cleaner cover and pull out
air fillter.
- Lightly brush off dust or wash it in water
and detergent.
- Dry completely before putting it back in
place.
Fuel filter
Cap
•
Check periodically.
- The standard spark gap is 0.6 to 0.7 mm
(0.024 to 0.028 in).
- Correct spark gap if it is wider or narrower
than the standard gap.
- If the electrodes are coated with carbon
deposites replace with a new spark plug.
Do not sandblast to clean.
Remainnig sand will damage engine.
•
Fastening torque = 14.2 to 15.2 N
·
m
(145 to 155 kgf
·
cm )
SPARK PLUG
FUEL FILTER
•
Check periodically.
- Do not allow dust to enter into fuel tank.
- Clogged filter will cause difficulty in
starting engine or poor engine
parformances.
- Pick up fuel strainer through fuel inlet
port with a piece of steel wire or the like.
- When filter is dirty, replace it.
Air filter
Air cleaner cover
IMPORTANT
Do not over tighten plug.
0.6 - 0.7 mm ( 0.024 - 0.028 in)
Summary of Contents for EDR-2100
Page 1: ......