14
Before you start
Before you start
Assembly
Install blower pipes
1.
Stand unit upright on blower base.
2.
Align locking ribs (A) on the blower pipe with recesses (B) in
fan case. Assure short locking rib (C) faces upward. Slide
the blower pipe into fan case until a clicking sound is heard.
3.
Align tabs (D) with grooves (E) and slide the round straight
nozzle over the blower pipe until there is light resistance. Do
not force connection.
4.
Hold the blower pipe, and turn the round straight nozzle
clockwise, engaging positive locking channels until connec-
tion is firm. Do not force connection.
Remove blower pipes
1.
Insert screwdriver (F) into hole located near lock symbol (G)
to release pipe lock.
2.
Pull pipes out of fan cace.
3. Remove
screwdriver.
WARNING
Read the operator's manual carefully to ensure that you assemble the product correctly.
Never perform maintenance or assembly procedures with unit running.
Using a product that has been incorrectly assembled could lead to an accident or serious injury.
1. Blower pipe
1. Blower pipe
2. Round straight nozzle
NOTE
Blower use will eventually loosen pipe connections. Exclusive
positive locking system allows pipes to be tightened. If loosen-
ing occurs, remove the round straight nozzle and install ac-
cording to instructions 3 & 4.