![background image](http://html1.mh-extra.com/html/echo/dhc-30/dhc-30_operators-manual_4029961018.webp)
WARNING
DANGER
In the following situations, release Trigger Switch immediately and
disconnect the product from the battery.
Ensure that the blades
have stopped before checking each area of the product. Replace
any damaged parts.
●
If the blade hits a rock, tree, post, or other such obstruction
while you work.
●
If the product suddenly starts to vibrate abnormally.
Continuing to use parts when they are damaged could lead to an
accident or serious injury.
STOPPING
1. Release Rear
Trigger Lever (E) or
Front Trigger Lever (F)
:
Motor and blade will stop
.
TRIMMING
Face material to be trimmed, such as tree leaves or bushes, hold
trimmer at a slight angle, squeeze Trigger Switch and begin trimming.
M
AINTENANCE
SKILL LEVELS
Your ECHO product is designed to provide many hours of trouble free service. Regular scheduled
maintenance will help achieve that goal. If you are unsure or are not equipped with the necessary
tools, you may want to take your unit to an ECHO Agency (ECHO Service Dealer) for maintenance.
To help you decide whether you want to DO-IT-YOURSELF or have the ECHO Agency
(ECHO Service Dealer) do it, each maintenance task has been graded.
Level1 = Easy to do. Most required tools come with unit.
Level2 = Moderate difficulty. Some specialized tools may be required.
Level3 = Experience required. Specialized tools are required.
18
IMPORTANT:
DO NOT cut branches over approximately 1 /4"
(6mm)
, watch for dangerous foreign objects such as wire or metal
NOTE:
If something gets caught in the blade, the circuit breaker
(G)
will pop out. Disconnect battery cord from unit, remove cause
of
problem and push circuit breaker back in. (If circuit breaker pops
out
immediately, wait 30 seconds and push in again). If breaker
pops
out during no load operation, stop unit and contact your ECHO
Agency (ECHO Service Dealer).
G
E
Summary of Contents for DHC-30
Page 23: ...NOTES 23...