MAINTENANCE
CS-2511PN
50
X7503334500
© 11/22 ECHO Incorporated
3.
Use compressed air or wooden
tool to remove dirt and dust
from between fins to let cooling
air pass easily.
4.
Clean the periphery of the
ignition coil and the flywheel
magneto.
5.
Assemble the components in
reverse order.
Spark Arrester Muffler
• The spark arrester muffler controls the exhaust noise and prevents hot,
glowing particles of carbon from leaving the muffler.
• Make sure the spark arrester screen is in good repair and properly seated
in the muffler.
• Certain internal combustion engines operated on forest, brush, and/or
grass-covered areas in the states of Washington, Oregon, Idaho,
California, Minnesota, New Jersey and Maine, are required to be
equipped with a spark arrester.
This requirement also applies to all U.S. Forest Service lands. In some of
these areas, the spark arrester system must be certified per USDA Forest
Service Regulation SAE J335.
Check with your local or state authorities for specific regulations in your
area. Failure to follow these requirements is a violation of the law.
