![background image](http://html.mh-extra.com/html/echo/ccs-58v/ccs-58v_operators-manual_531755029.webp)
English 29
Fig. 46
MAINTENANCE
Feathering or burring of the bar rails is a normal pro-
cess of bar wear. Such faults should be smoothed
with a file as soon as they occur.
A bar with any of the following faults should be
replaced.
Wear inside the bar rails which permits the chain
to lay over sideways.
Bent guide bar.
Cracked or broken rails.
Spread rails.
Lubricate guide bars with a sprocket at their tip
weekly. Using a grease syringe, lubricate weekly in
the lubricating hole. Turn the guide bar and check
that the lubrication holes and chain groove are free
from impurities.
NOTE: Do not replace the screw with an ordinary
screw. Use only identical replacement parts from
the manufacturer when replacing parts.
TRANSPORTING AND STORING
See Figure 46.
Do not store or transport the chain saw when
it is running. The chain saw should always be
idle before storing or transporting.
Remove the battery pack from the chain saw.
Always place the guide bar scabbard on the
bar and chain before storing or transporting the
chain saw. Use caution to avoid the sharp teeth
of the chain.
Clean the chain saw thoroughly before storing.
Store the chain saw indoors, in a dry place that
is locked and/or inaccessible to children.
Keep away from corrosive agents such as gar-
den chemicals and de-icing salts.
Summary of Contents for CCS-58V
Page 90: ...32 English NOTES NOTAS ...
Page 91: ...English 33 NOTES NOTAS ...