11
Echö
EN
FAQ
CONFIGURATION ISSUES
Q: The Echö doesn’t turn on
A: Install a new battery and make sure the On/Off/ Volume
E
knob is turned on.
Verify that the battery connector is connected fully onto the battery terminals.
Make sure you’ve removed the clear protective wrapper off of the battery.
Q: The power indicator LED
F
is weak
A: Install a new battery.
Q: There is no sound coming through the earphones
A: Make sure the power indicator LED
F
is on.
Check that the earphone wire is pushed all the way into the headset jack
A
of the Echö.
Check all the wires to be sure they are in good condition. Be sure to turn up the volume
using the On/Off/Volume
E
knob. If it is still not working, install a new battery.
PROBLEM
CAUSE
SOLUTION
Audio scream
Audio volume too high
Turn down the volume
Too much gel on the probe surface
Use less gel
Battery is low
Replace the battery
Weak sound
output
Audio volume too low
Turn up the volume
Insufficient gel
Add gel
Battery is low
Replace the battery
Low sensitivity
Incorrect probe position
Move the probe to fin
de correct position
Insufficient gel
Add gel
Summary of Contents for bbluv
Page 4: ......