background image

P

ower

 e

dger

 A

ttAchment

o

PerAtor

'

s

 m

AnuAl

7

C

onTenTs

The ECHO product you purchased has been factory pre-assembled for your convenience.

After opening the carton, check for damage.  Immediately notify your retailer or ECHO Dealer of damaged or missing 

parts.  Use the contents list to check for missing parts.

___ 1  -  Power Edger Attachment

___ 1 -  Operators Manual 

___ 1 -  Warranty Registration Card

___ 2 -  Split Pins

___ 1 -  Storage Hook Assembly

___     Assembly Tool (s)

1. 

BLADE - 

Rotates to provide cutting action.

2. 

DEBRIS ShIELD/FLAP -

 Mounted over the cutting attachment.  Helps protect operator by deflecting debris                  

produced during the edging operation.

3. 

DRIVE ShAFT ASSEMBLy - 

Contains a specially designed liner and the flexible drive shaft.

4. 

WhEEL - 

Adjustable up/down, sets depth of blade.

a

ssembly

A

B

D

Parts Required:

  PAS or SRM-SB Power Head w/Shaft & Coupling.

1.  Set Power Head/Shaft Assembly on a level surface.

2.  Pull locator pin (A) out, and turn counter-clockwise 1/4 turn to 

lock-out position.

3.  Remove vinyl cap from attachment drive shaft.

4.  Remove cardboard spacer, if necessary.

5.  Carefully fit attachment drive shaft assembly into coupler (B) to de-

cal assembly line (C), making sure that the inner lower drive shaft 

engages into the square upper drive shaft socket.

power

 

head

 

shafT

/

lower

 

shafT

 

assembly

  

  WARNING  

Do not perform maintenance or assembly procedures with engine running.

Summary of Contents for 99944200475

















Reviews: