USER MANUAL
SPRING REVERB &
ANALOG BBD CHORUS
6
PAGE 10 OF 12
CHORUS ECHO
EF-X3R
A
E
G
H
I
J
Q
P
O
The EF-X3R has a real spring reverb and fully analog
BBD chorus. They can be used in combination or on
their own by adjusting (E), (O), (P) and (Q).
Blend -
With chorus switch (E) in the ON position,
you can adjust the amount of spring reverb in the
mix by increasing (clockwise) or decreasing (counter-
clockwise) knob (Q).
Chorus Only -
With reverb volume (Q) turned fully
down (counterclockwise), only the chorus will be
heard. By adjusting Rate (O) and Depth (P), various
chorus settings can be achieved. Switch (E) must be in
the ON position for chorus to be heard.
Vibrato -
With chorus switch (E) ON, and direct
switch (A) OFF, the effect heard is vibrato. The rate
and depth of the vibrato are controlled by chorus
controls (O) and (P).
Reverb Only -
For spring reverb only, set chorus
switch (E) to the OFF position. Adjust reverb volume
(Q) to set the amount of spring reverb in the mix.
