2. To create an application, write Neuron
®
C
code using a text editor of your choice
such as Windows Notepad, and then use
the
Application
tab to select your source
file, select your target hardware, and then
build an application image. Alternatively,
you can select one of the example appli-
cations.
3. Click the
Device
tab, select
LON1
as the net-
work interface, and then click
Connect
.
4. Press the
Service
button on your device, and
then click
OK
to select the device.
5. Select an application image to load, and then
click
Load
to load the application image into
the device.
6. After you load an application that has support for the CENELEC Configuration Library enabled,
LED1 will begin flashing, indicating that the Evaluation Board has entered CENELEC configura-
tion mode. If LED8 is on, then CENELEC is enabled. If LED8 is off, CENELEC is disabled. You can
press the SW8 button to enable or disable CENELEC. When you have made a selection, press the
SW1 button to confirm your selection and exit CENELEC configuration mode. You will not be able
to load another application into the Evaluation Board, or perform any network operations with
the Evaluation Board, until you have made a selection and exited CENELEC configuration mode.
For more information, see the following documentation included in your Echelon
Mini EVK program folder:
•
Mini EVK User’s Guide
—for more information on the examples and how to develop applica-
tions with the Mini Application.
•
Mini EVK Hardware Guide
—for more information on the Evaluation Boards and MiniGizmo.
•
Introduction to the L
ON
W
ORKS
®
System
—for more information on the L
ON
W
ORKS
platform.
3. Click
Add
to open the
Add Device
dialog,
and then press the PL
3150 Evaluation
Board’s
Service
button. The board’s
Neuron ID appears
on the
Add Device
dialog.
4. Click
OK
to connect the board to the Monitoring
& Control Example Application.
5. Control the MiniGizmo LEDs by clicking the light
switch icons, and monitor the MiniGizmo temper-
ature sensor.
Use the Mini EVK Application to load other example applications and to create
your own applications.
1. Click the Windows
Start
button, point to
All Programs
, point to
Echelon Mini EVK
, and then
click
Mini EVK Application
.
Copyright © 2005-2006, Echelon Corporation. Echelon, L
ON
W
ORKS
, Neuron, 3120, 3150, and the Echelon logo are registered trademarks of Echelon Corporation. Other marks belong to their respective holders.
P/N 078-0301-01C
5
6