Moving a LonMaker Shape
The MPR-50 shape can be moved within a LonMaker drawing; the MPR-50 shape
moves as a unit that includes the five router shapes, the Monitor shape, and the
internal channel.
•
To move the MPR-50 shape within a subsystem (page), drag the shape to its
desired location.
•
To move an individual router to another subsystem, right-click the shape to move
and then click
Change Subsystem
on the shortcut menu.
Note:
You cannot move LonMaker shapes using Visio's cut and paste command
s.
Commissioning an MPR-50 Router
1.
Right-click the shape of the router that you have connectivity to from your
LonMaker tool, and then click
Commission
. The Commission Device Wizard
appears. Note that you may have connectivity to any of the five routers—it is not
necessarily Router 1 as shown below.
2.
Select whether the router application will be online or offline upon
commissioning. The router can forward packets between its channels only when
it is online. Most end-users will want to choose online.
14
Connecting to the Network
Summary of Contents for LonWorks MPR-50
