8
ASSEMBLY
other end of Long Band to hole on Rear Frame (a).
Make sure hooks are inserted completely (fig. 5c).
NOTE: Chair will pivot easily at this point. Make sure
you hold Frame firmly in place as you attach bands.
17. As shown in fig. 5, hook Short Band (b) into upper
hole (b) on Seat Support Frame and hook other end
into hole on Front Frame (b).
18. Stand unit upright.
19. As shown in fig. 6, working from back of unit, slide Left Upper Support
Tube (8) through fabric pocket on left into its corresponding hole on
Main Frame Assembly.
20. Secure in place using M6x34mm Carriage Bolt, Curved Washer, and
Acorn Nut
(fig. 6a).
21. Repeat step 19-20 on
right side to attach
Right Upper Support
Tube (9).
FIG. 5
FIG. 6
c
a
