LumInsight IoT Gateway and Base Station – Ethernet
Rev. B (July 2018)
Setup Guide (Network Configuration)
3
078-1074-01B
LumInsight IoT Gateway Network Information Request (NIR) Form
It is recommended that the Ethernet Gateway be configured prior to being installed, and that the configuration of the Ethernet
Gateway be performed by the customer’s IT/Network Administrator.
Prerequisites
The network settings (IP address, Subnet Mask, and Default Gateway) must be obtained from the IT/Network Administrator
of the network location where the Ethernet Gateway will be installed.
If the Ethernet Gateway is assigned a Static IP address, the IP address must be outside of any/all DHCP Server’s Scope(s)
that are active on the network.
The local network must also allow outbound connections via ports 8883 and 123 for a secure connection. The
local network should also provide access to
pool.ntp.org
and
nist.time.gov
. (The LumInsight Cloud CMS does not require
any inbound ports to be open.)
The following information is to be provided by customer’s IT/Network Administrator:
IP Address: _____._____._____._____
Netmask: _____._____._____._____
Default Gateway: _____._____._____._____
DNS: _____._____._____._____
VPN Login:
VPN Password:
Echelon Customer Support
For assistance, please refer to the Echelon Customer Support web site at
http://echelon.com/support
.
