3.2
- Disassemble the components of the piston guide,
checking the condition, replace if necessary.
3.3
- For re-assembly: Invert operation.
R
ePlAcing
The
PisTOns
4.1
- Remove the head (See
∂
), then unscrew the piston
retainers.
4.2
- Slide off the ceramic pstions, check their condition,
and replace if necessary.
4.3
- For re-asembly: Invert above operations. Keep to
torque rating and shown on page 8.
R
ePlAcing
Oil
seAls
6.1
- Remove the head (See
∂
),
remove the ceramic pistons
discharge oil
6.2
- Remove the oil seals and the O-Rings, checking the
seats and the piston guides.
6.3
- Remove the rear cover gasket.
6.4
- For re-assembly: Invert above operations. Keep to
torque ratings as shown on page 8.
c
RAnk
mechAism
mAinTenAnce
7.1
- Remove the head (See
∂
),
remove the ceramic pistons
discharge oil
7.2
- Remove the rear cover.
7.3
- Remove the con-rod sliding the one piece-rod
whilst removing the shaft.
7.4
- For re-assembly: Invert above operations. Replace
the oil seals!
•
•
•
•
Be careful not to
scratch piston
guide!
