![background image](http://html1.mh-extra.com/html/ecg/vm-3100-hobby/vm-3100-hobby_instruction-manual_3960812027.webp)
GB
27
27
than 8 years and under supervision. Children under the age of 8 shall keep away from the appliance and
its power supply.
DESCRIPTION OF THE VACUUM CLEANER
1
2
3
4
5
6
7
8
9
0
List of parts
1. Combined floor nozzle
2. 3 piece tube
3. Hose handle
4. Hose
5. Vacuum cleaner handle
6. On/Off switch
7. Opening for inserting the hose
8. Wheels
9. Combined crevice tool and dust brush
10. Upholstery nozzle
VACUUM CLEANER ASSEMBLY
If any part of the vacuum cleaner is missing or is damaged, do not assemble the vacuum cleaner and contact
your vendor. The vacuum cleaner must be switched off and unplugged prior to assembly!
1. Turn the container of the vacuum cleaner and insert the four wheels into the slots in the base. Make sure
that the wheels can turn freely (
1
).
2. Attach the HEPA filter to the float holder, then attach the top cover of the filter and tighten it clockwise.
When removing the HEPA filter, release the upper cover counterclockwise (
2A
).
Note:
When cleaning a small amount of liquid, the HEPA filter can stay in place. If you vacuum a large volume
of liquid, we recommend that you remove the HEPA filter and install a foam filter instead. (
2B
). If HEPA
filer should stay in the vacuum cleaner, it would become soggy and the vacuum cleaner would blow out
aerosol mist.
3. Insert the motor unit with the installed filter into the container of the vacuum cleaner as shown in the
figure (
3
).