![background image](http://html1.mh-extra.com/html/ecg/pd-099/pd-099_instruction-manual_3958514025.webp)
25
GB
5. When the food is ready, open the top cover using the handle. Remove the food using plastic spatula. Never
use metal tongs or a knife, you could damage the non-stick coating surface of the baking plates.
6. When you are fi nished with the baking, unplug the power cord from the outlet and let the open appliance
cool down.
Removal an exchange of the baking plates
1. Always unplug the appliance from the power supply and let it cool down before
removal of the baking plates.
2. Open the cupcake maker. On the front of the appliance are the release buttons
for the top (A) and bottom (B) plate. When you press the button, the plate
slightly pops off the base.
3. Grasping the plate with both hands, slide it out of the metal holders and pull it
away from the base.
4. Press the release button of the second plate and remove it the same way as the
fi rst one.
5. When attaching the plate, it should be oriented so that the molding on the
bottom of the plate is fl ush with the heating element in the appliance. Then
insert the spiral until it clicks into place.
CLEANING AND MAINTENANCE
Cleaning of the appliance
•
Prior to cleaning unplug the appliance from the power supply and wait until the appliance and the plates
cool down completely.
•
Clean the external surfaces with only moistened cloth to prevent water, oil or grease from getting into the
appliance.
Never immerse the appliance in water, do not wash it in the dishwasher!
•
You can wash the baking plates under running water. Do not use dishwasher.
•
If you leave the plates in the appliance during cleaning, wipe them with a soft, wet cloth or tea towel.
In case that there is burnt dough sticking to the surface of a plate, moisten the sticking dough using
a sponge dipped in a solution of water and detergent and let it soak. You can also use a wet paper towel,
which you would place on the burnt dough. Never use a scouring pad or an abrasive sponge.
•
Do not clean the interior or exterior surfaces using abrasive powders or cleaners or aggressive chemical
cleaning products based on lye or acids. You would damage the exterior fi nish of the appliance.
Appliance storage
•
Prior to storing the appliance, always unplug it from the power supply and let it cool down completely.
•
Make sure that the appliance, including the plates, is completely clean and dry.
•
You can wrap the power cord around the base of the appliance.
•
Store the appliance in a dry and clean place.
TECHNICAL DATA
Nominal voltage: 230 V~ 50 Hz
Nominal input power: 700 W