![background image](http://html.mh-extra.com/html/ecg/op-201/op-201_instruction-manual_531222013.webp)
NAIL FILE
13
GB
SAFETY INSTRUCTIONS
Please read carefully and keep for future reference.
Warning:
The safety measures and instructions, contained in this
manual, do not include all potential conditions and scenarios. The user
must understand that common sense, caution and care are factors that
cannot be integrated into a product. Therefore, the user is responsible
for these factors when using and operating this appliance. We are
not liable for any damages caused during shipping, by incorrect use,
voltage fluctuation or the modification or adjustment of any part of
the appliance.
To protect against the risk of fire or electric shock, basic precautions
must be taken while using electrical appliances, including the following:
1. Never use the appliance if it is damaged.
All servicing should be
done by qualified service center!
2. The appliance should not be left unattended when in operation.
3. Do not use the appliance close to a source of heat, e. g. oven. Protect
it against direct sunlight.
4. Use accessories only advised by the manufacturer, otherwise you
risk losing the warranty.
5. Use this appliance only in accordance with the instructions in
this manual. The appliance is designed for domestic use only. The
manufacturer is not liable for damages caused by improper use.
6. Never use the device on sick or inflamed skin!
Do not immerse in water! – Do not immerse in water!
USING THE APPLIANCE
Notice:
•
The device is not suitable for use in water.
•
Do not expose the product to direct sunlight or places with excessive temperature or humidity. Do not use
without an attached band.
•
Do not press too hard during application, you could stop the rotation or damage the nail.
Using the electric nail file
1. Open the compartment cover
1
and insert 2 batteries (AA). Observe correct polarity of the batteries (+)
and (-). Replace the battery compartment cover after inserting the batteries.
2. Remove cover from the attachment
4
, select a suitable sanding band (
5
,
6
or
7
) and fasten it to the
attachment.
3. The device is now ready for use. Select the required speed and apply.
Summary of Contents for OP 201
Page 15: ......