GB
5
•
This device is used to display indoor and outdoor temperature and
time, and as an alarm clock.
Do not immerse in water! – Do not immerse in water!
DANGER TO CHILDREN:
Children must not play with the packaging material.
Do not let the children play with plastic bags. Risk
of suffocation.
BEFORE FRST USE:
Insert batteries (not included) into weather station and sensor. Observe
correct battery polarity. Information on the type of batteries is given in the
technical parameters of this manual.
The sensor is available under the designation:
MS 1200
.
Turning on and reset:
1. The device turns on and the display lights up when the batteries are
inserted.
2. The main unit starts receiving the signal from the indoor and outdoor
temperature and humidity sensors after 3 minutes.
3. The unit switches to RF reception mode after 3 minutes.
4. The default clock format is 24H.
CONTROL BUTTONS AND DISPLAY
Normal display mode
"TIME" button - hold for 2 seconds to open the time setting mode.
"ALARM" button - press to turn the alarm on and off. Press and hold to open
the alarm clock mode.
"UP" button - press to display AM / PM status.
"CH" button - press to switch channel CH1 /2/3. Hold for 2 seconds to delete
the registered channel.
"MEM" button - press to display the maximum and minimum saved
temperature and humidity. Hold for 2 seconds to clear the saved max / min
temperature and humidity.
"SNOOZE / LIGHT" button - press to turn on the lights.
