![background image](http://html.mh-extra.com/html/ecg/kv-135-s/kv-135-s_instruction-manual_531262019.webp)
GB
19
WEIGHING MODE
1. Place the scale on an even, hard and stable surface.
2. Before turning the scale on place a kitchen bowl on it (if you wish to use it).
3. By pressing the
ZERO/ON
button turn on the weighing mode.
4. Wait until all the information is displayed on the LCD display.
5 Place the object to be weighed on the scale (into the bowl) and the LCD display will show the measured
weight of the object.
Unit conversion
This digital kitchen scale weighs in both metric (g, ml) and imperial (lb:oz, fl’oz)
units. Press the conversion button on the bottom side of the scale to set the
desired unit of measure.
Display of liquid volume (milk, water)
1. Place a container on the weighing surface.
2. By pressing the
ZERO/ON
button reset the weight of the container to zero, so that a “0” is displayed.
3. Pour the liquid into the container.
4. To display the volume of the liquids, press the
MODE
button and select on of the options WATER, MILK,
then the desired liquid volume will be shown on the display.
Display of weight
Display of water volume
Display of milk volume
ZEROING AND TARE FUNCTION
These functions are used to gradually measure the weight of various portions added to the previous ones,
which remain on the scale. Place the first portion on the scale and its weight will be shown on the display.
Before adding another portion on to the scale press the
ZERO/ON
button and the value on the display will
be reset to zero ("0"). This step can be repeated.
Each time the
ZERO/ON
button is pressed the LCD display will show “ ----- ” or “0g”. “ ----- ” means that the
state is unstable, so please wait a while. When “0g” is displayed an icon “O” or “T” (depending on the weight)
will light up in the bottom left corner, indicating that the zeroing function is active. The maximum capacity
will not change.
If the total sum of the weights of all the portions on the scale is lower than 200 g then the zeroing function
will automatically be used.
If the total sum of the weights of all the portions on the scale is higher than 200 g then the TARE function will
automatically be used.
Note:
The scale will automatically shut off after 1 minute.
Warning messages
1. The battery is flat, replace with a new battery.
2. Scale overloaded – the maximum load of 5 kg is displayed on the scale. Please remove
the portion being weighed from the scale to prevent damage.