![background image](http://html.mh-extra.com/html/ecg/grs-3820-magnetic/grs-3820-magnetic_instruction-manual_531315013.webp)
GB
12
13
with a towel. Always start cutting from the back of the head. Cut against the direction
of hair growth and work towards the centre of the head. The left and right extensions
are designed for gradual haircutting, e.g. on the sides of the head for men's haircuts.
Beard trimming
Trim the beard in the direction of growth. For a smooth shaved face, use the shaver
without the attachment. For light stubble, the attachment with a height of 1 mm
and trimming under the nose of 2 mm. Use the variable height attachment to trim a
moustache or beard.
NOTE:
Always turn off the trimmer during breaks in cutting.
CLEANING AND MAINTENANCE
Turn off the device.
Remove the removable comb attachment and rinse with water.
Before reassembly, allow it to dry thoroughly.
Use the included cleaning brush to
clean the cutting head with the blades.
Never clean the blade head with water or any
other liquid.
We recommend gently lubricating the moving teeth of the cutting edges
with silicone oil after each use.
You can use the supplied oil.
Use only acid free oil.
For lubrication,
DO NOT USE
vegetable oils, grease or oils with solvents. The solvents
evaporate, leaving a thick layer of lubricant, which can slow down the movement of
the blades.
Remove excess lubricant with a dry, lint-free cloth.
TROUBLESHOOTING
DANGER!
Do not attempt to repair the device by yourself. Whenever a malfunction occurs, pull
the plug out of the electrical outlet.
Malfunction:
Check the following:
The device does not work
Is the battery empty?
The heads of the trimmer
do not work smoothly
Are the heads clean and lubricated?
If any of the above-mentioned malfunctions occur, contact our service center without
delay.
Repairs must be carried out by a specialized company.
TECHNICAL SPECIFICATIONS