![background image](http://html1.mh-extra.com/html/ecg/fs-40-r/fs-40-r_instruction-manual_3898385035.webp)
GB
GB
35
Make sure that the power cable or extension cord can not be
accidentally pulled out of the socket during operation.
Only carry the appliance by holding the body of the fan.
Do not immerse in water!
Warning:
To prevent overheating, do not cover the fan.
DANGER FOR CHILDREN:
Children must not play with the packaging
material. Do not let children play with the
plastic bags. Risk of suffocation.
DESCRIPTION (Page 2)
A
Fan
1. Front grille
2. Safety nut of the fan blade
3. Fan blade
4. Safety nut of the fan grill
5. Rear grille
6. Motor body with shaft
7. Fan body with power cable and control panel
8. Safety screw of the fan body
9. Telescopic pole
10. Fixed pedestal with lock nut
11. Stand
B
Control panel and remote control
BUTTONS (those on the panel are identical to the
buttons on the remote control)
12.
OFF
– turn off fan
13.
ON/SPEED
– turning on the fan and adjusting
the fan speed
14.
TIMER
– timer
15.
SWING
– horizontal oscillation
16.
MODE
– fan mode setting
C
INDICATORS (only the control panel)
17.
POWER
– power indicator
18.
LOW/MEDIUM/HIGH
– information about the
selected fan speed
19.
NATURAL/SLEEP/NORMAL
– information about
the selected mode
20.
0.5H/1H/2H/4H
– information about timer
setting
ASSEMBLY
Warning:
The fan may be used only if it is properly and completely assembled, including the base and the
guard grille.
•
Attach the pedestal to the base. Attach it firmly with the included nut and screw from the bottom side of
the base.
•
Attach the rear grille on the motor body so that the projections on the motor fit into the corresponding
hole in the grille. (The grille handle must be at the top of the fan.) Secure it with a nut. Tighten it clockwise.
•
Attach the blade unit to the motor shaft and secure it with a nut.
ATTENTION:
Tighten the nut
counterclockwise.
•
Attach the front grille to the rear grille. For safety reasons, both grilles must be secured by means of clips
on the sides of the grilles and fixed with the included nut and screw screwed into the hole at the bottom
of the grille.
•
Fit the body of the fan on the telescopic pole of the pedestal and secure it using the fixed screw.
•
Pull up the telescopic pole to the required height and secure it with a lock nut.
Summary of Contents for FS 40 R
Page 2: ...1 2 3 4 5 6 7 8 9 0 qa qs qd qh qf qg ql qk qj w A B C...
Page 73: ......
Page 74: ......
Page 75: ......