![background image](http://html1.mh-extra.com/html/ecg/ewf-1064-dd/ewf-1064-dd_instruction-manual_531355014.webp)
English
English
14
Washing machine operation
1. Connect the washing machine to the power supply.
2. Turn on the water supply.
•
Open the washing machine door.
•
Spread the laundry evenly in the washing machine.
•
Gently push on the door until it clicks.
Program selection
Use the program table to select the most suitable program for your laundry.
Half load detection system
Your washing machine has a half load detection function.
If you put less than half the maximum amount of laundry in the washing machine, it will automatically set
the half load function regardless of the selected program. This means that it takes less time to complete the
selected program and uses less water and energy.
Additional functions ("Quick wash" see below)
You can select an additional function before starting
the program.
•
On the control panel, press the button below the
additional function symbol.
•
If the additional function symbol is on, it means
that the function has been activated.
•
If the additional function symbol flashes, it means
that a function has not been selected.
Cause why the function was not activated:
•
The additional function is not compatible with
the selected program.
•
The washing machine has gone too far in the program to be able to select an additional function.
•
The additional function you selected is not compatible with another additional function you
selected previously.
Temperature selection
Use the water temperature setting button to change
the automatically programmed water temperature.
After selecting a program, the maximum temperature
for that program is automatically set. To change the
temperature, keep pressing the water temperature
setting button until the desired temperature appears
on the digital display.
You can gradually reduce the water temperature
between the maximum water temperature of the
selected program and the cold wash (-) simply by
pressing the temperature setting button.
If you have skipped the water temperature you want to set, keep pressing the water temperature button until
the desired temperature is displayed again.