
English
English
9
3. Connect the other end of the drain hose directly to the drain or sink.
2
1
3
NOTICE:
The hose must be connected so that it can not come loose. If the hose is disconnected during
draining, the house may be flooded.
IMPORTANT NOTE:
Fasten the drain hose at the maximum height of 80 cm.
IMPORTANT NOTE:
Make sure that the drain hose is not bent and is not wedged between the drain and the
appliance.
Adjusting the feet
•
To operate the dryer with less noise and vibration, it must be stable and balanced on the feet. Adjust the
feet to ensure the proper product balance.
•
Turn the feet to the left or right until the dryer is in a horizontal position.
IMPORTANT NOTE:
Never remove the adjustable feet.
Power connection
NOTICE:
There is a risk of electric shock.
•
Your dryer is set to use 220-240 V and 50 Hz.
•
The dryer power cable is equipped with a special connector. This connector must be connected to
a grounded socket protected by a 16 amperes fuse as indicated on the rating plate. The fuse for short-
circuit protection of the power line where the socket is connected must also be 16 amperes. If you do not
have such a socket or fuse, contact a qualified electrician.
•
Our company is not liable for damages caused by use without grounding.
IMPORTANT NOTE:
Operation of the appliance at low voltage shortens its life and reduces the performance
of your machine.
Installation under the worktop
•
Leave at least 3 cm of space between the side and rear walls of the product. This also applies to the top wall
if you intend to install the appliance under the worktop.
•
Assembly / disassembly in the case of under the worktop installation must be carried out by an authorized
service technician.