![background image](http://html.mh-extra.com/html/ecg/erb-21860-nwa/erb-21860-nwa_instruction-manual_531243048.webp)
GB
48
OPERATING THE REFRIGERATOR
Setting the refrigerator temperature
•
The initial temperature value is set at 6 °C.
•
Press the button once, the set value starts fl ashing.
•
If you will hold the button, a lower temperature will be selected. (8, 6, 5, 4, 2, super a eco)
•
If none of the buttons are pressed for 1 second, your choice will be set, fl ashing 3 ×. A beep sounds.
•
The temperature selected before Super Cooling or Energy Saving mode is activated will remain the same
even if the mode ends or is cancelled. The appliance continues to function with this value.
Quick cooling mode
How to use it?
Press the setting button until the Super Cooling mode symbol lights up. A beep sounds. The mode will be set.
During this mode:
•
You can not select the Energy Saving mode.
•
The Super Cooling mode can be cancelled using the same steps as the selection.
Energy Saving mode
How to use it?
Press the setting button until the Eco mode symbol lights up. A beep sounds. The mode will be set.
During this mode:
•
You can select the Super Cooling. The Energy Saving mode is automatically cancelled and the selected
mode is activated.
•
The Energy Saving mode can be cancelled using the same steps as the selection.
Note concerning the temperature setting
•
Your temperature setting will not be deleted by a power outage.
•
We do not recommend using the refrigerator in an environment where the temperature is below 10 °C.
•
The temperature setting should be done according to the door opening frequency and the quantity of
food stored in the refrigerator.
•
Your refrigerator must operate for 24 hours at a given ambient temperature without interruption to allow
total cooling. Do not open the refrigerator door frequently and do not put too much food into it at this
time.
•
The 5 minutes delay function is used to prevent damage to the refrigerator compressor when you unplug
the cable and then reconnect it or when a power failure occurs. Your refrigerator starts working normally
after 5 minutes.
•
Your refrigerator is designed to operate at the intervals specifi ed in the standards, in accordance with the
class indicated on the information plate. We do not recommend starting your refrigerator outside the
stated limits, so that you can achieve eff ective cooling.
•
This appliance is designed for use in the ambient temperature between 10 °C and 43 °C.
Summary of Contents for ERB 21860 NWA++
Page 2: ......