English
English
7
The description and information of the appliance may vary according to the type of model. This
appliance is not intended for use as a built-in device.
PLACING THE APPLIANCE
•
Remove all packaging materials including foam pads and tapes inside the refrigerator before use. Tear off
the protective film on the door and body of the refrigerator.
•
Keep away from heat and avoid direct sunlight.
•
Do not spray water on the refrigerator or place it in damp places to avoid damaging the electrical insulation
properties of the refrigerator.
•
Place the fridge in a well-ventilated place inside. The base must be level and stable (if unstable, turn the
levelling feet left or right to level the fridge).
•
The top space above the refrigerator must be greater than 10 cm and the refrigerator should be placed
against a wall with a clearance of more than 10 cm to facilitate heat dissipation.
•
Make sure there is enough space for convenient opening of doors and drawers.
Installing the door handle
1. Remove the screw hole covers (1) from the door and use a Phillips screwdriver to firmly fix the screws (3)
into the screw hole (2).
2. Fit the screw hole cap (4) onto the screw hole of the handle.
3. When dismantling, reverse the procedure.
Door opening reversal
What you will need to change the direction of the door opening:
•
Phillips screwdriver
•
Spatula and flat screwdriver
•
5/16 socket wrench and ratchet
•
Masking tape
Procedure for changing the opening direction:
(may vary by appliance model)
1. Switch off the refrigerator and remove all items from the door compartments.
2. Remove the screw hole covers, screws and handle and remove the plastic screw hole covers from the other
side.
3. Remove the top hinge cover, screws and top hinge and remove the hole cover from the other side.
Disconnect the cable connector on the right side of the top of the refrigerator.
