ECG Chop&Cut SP 4015, Instruction Manual

Page: 6 / 112

English English
6
21. Use this appliance only in accordance with the instructions in
this manual. Incorrect use may result in injury. This appliance is
designed for domestic use only. The manufacturer is not liable for
any damage caused by the improper use of this appliance.
22. This appliance should not be used by children. Keep the appliance
and its power supply out of reach of children. The appliance can be
used by the physically and mentally impaired or by individuals with
insufficient experience and knowledge, if supervised or trained
to use the appliance in a safe manner and understand potential
dangers. Children shall not play with the appliance.
23. This appliance is specified for household use. Do not use outdoors
Do not immerse in water! – Do not immerse in water!
DANGER TO CHILDREN:
Children must not play with the packaging
material. Do not let the children play with
plastic bags. Risk of suffocation.
MAIN FEATURES
• The S-shaped blade design allows for efficient chopping of raw foods.
• Multi-level button for power control.
• Motor overheating protection.
• Option to remove all components for easy cleaning.
• Smooth operation and easy cleaning
• Spatula for easy removal of mixed raw foods.
OPERATING INSTRUCTIONS
BEFORE FIRST USE
• Read all instructions and important information
• Remove all packaging material.
•
Remove the guards from the blades and store them.
When handling knives, take extra care to avoid
injury - the knives are sharp.
• Wash the container, lid, blades and anti-slip mat with soapy water, rinse and dry thoroughly. Do not wash
in a dishwasher.
• Wipe the outside of the motor unit with a clean damp cloth. Do not immerse the motor unit in water. Do
not use abrasive cleaners or scouring pads, as this could damage the device.
• Attach the anti-slip mat to the underside of the mixing bowl.
Chopping foods
Assembly/Disassembly of the chopper
Assembly:
Insert the secondary blade into the main blade (Fig. 1 and Fig. 2) and screw in the secondary blade
counterclockwise (Fig. 3). Then remove the blade guards.
Disassembly:
Remove the secondary blade by unscrewing it clockwise from the main blade.