GB
39
Volume control
Set the volume using the buttons
VOL-
and
VOL+
. During setup, the display briefly shows the current volume,
then the display returns to the original display.
Setting the time
1. Press the button
PROG.CL
in the standby mode.
2. The display shows 12H or 24H time display mode.
3. Using the buttons
.
/
>
Select the time display in 12 or 24 hour format.
4. Confirm by pressing the button
PROG.CL
.
5. Repeat the steps 2 and 3 to set hours and minutes.
Note:
The device exits the time setting mode after 10 seconds of inactivity.
CD playback
Compatible CD disk types.
This device supports playing CD disks of the following types:
•
CD Audio, CD-R, CD-RW, MP3-CD, WMA CD
Note:
The ability to play a particular disk depends on the quality and physical condition of the disk, the quality
of the recording, the recording method and the software used to record the disk. We cannot guarantee
100% ability to play all disks. It is not a malfunction of the device.
Play
1. Press repeatedly
FUNC
to select CD.
2. Insert the CD with the label facing upwards and close the door of the CD compartment.
3. The device will load the tracks on the disk and starts the playback.
4. Press
u
to pause the playback, press it again to resume playback.
5. Using the buttons
.
/
>
skip to previous or following track.
6. Press and hold
.
/
>
to move quickly within the track backward or forward. When you release the
button, normal playback resumes.
7. Press
x
to stop playback of the disk.
Other functions
Press
P.MODE
to switch between normal playback, repeating one/all tracks and a random playback (RAND
indicator).
Programming
The device allows to create a program of up to 20 tracks, played in selected order. You can save individual tracks
in the program repeatedly.
1. Stop playback in the CD mode by pressing the button
x
.
2. When the playback stops, press the button
PROG.CL
. The display flashes
PROG
and
P01
appears.
3. Using the buttons
.
/
>
select the required track.
4. Press the button
PROG.CL
to save the selected track in given position in the program. The display flashes
P02
.
5. You can create a program of up to 20 tracks long by repeating steps 3 and 4.
6. Press the button
u
to start playback of the program.
7. Stop playback by pressing
x
.
8. If you want to delete the program from memory, press twice the button
x
, or open the door of the CD
compartment. The indicator
PROG
disappears from the display.
Note:
if the indicator
FUL
appears, it means that the memory of the program is full.
