GB
44
5. When you are listening to the radio, you can press repeatedly
P-DN
or
P-UP
to call up the required preset
station.
CD playback
You can play original CD and CD-R/RW discs in the device.
1. Press the power button to turn the device on.
2. Push on the marked area of the door to open the door of the CD compartment.
3. Insert the disc with the label up.
4. Close the door of the CD compartment.
5. Press repeatedly
FUNCTION
to select the CD mode (display shows CD).
6. When the door to the CD compartment is closed and the disc is in, the display shows the total number of
tracks and then the playback starts beginning with the first track.
7. If there is no disc in the device, the display shows “
” and the device stops.
8. Press
PLAY/PAUSE
to pause the playback, press again to resume playback.
9. Press
BACK
or
NEXT
to go to the previous or next track.
10. Hold the button
BACK
or
NEXT
to move faster back or forward within the track.
11. If the disc contains MP3 tracks in various folders, you can select the required folder by using the buttons
P-DN
or
P-UP
.
12. Press
STOP
to stop the playback of the disc.
Repeat Mode
•
Repeating one track:
During CD playback press once the button
REPEAT
. The display shows an indicator
of repeating one track “
”. The current track will play repeatedly.
•
Repeating all tracks:
During CD playback press twice the button
REPEAT
. The display shows indicator of
repeating all tracks “
ALL”. The whole disc will play repeatedly.
•
Cancelling the repeat function:
Press repeatedly the button
REPEAT
until the repeat indicator disappears.
Programming
1. When the CD playback is stopped, press once the button
PROGRAM
. The display shows the indicator
“PROGRAM” and the number of the first program position “
”.
2. Using the buttons
BACK
or
NEXT
select the required track and press
PROGRAM
to store it in the memory.
3. When repeating the previous step you can create a program of up to 20 tracks long.
4. Press
PLAY/PAUSE
to start program playback.
•
Cancelling the program:
While the playback is stopped, press the button
STOP
or open the door of the
CD compartment. Cancelling the program is indicated when the program indicator goes off.
USB playback
1. Insert the USB storage device in the USB port.
2. Press repeatedly
FUNCTION
to select the USB mode (display shows USB).
3. After loading the content the playback starts from the first track.
4. Using
PLAY/PAUSE
you can pause the playback and start again.
5. You can use the same buttons to control the playback as in the CD mode.
Note:
Due to the many different formats available on the market we cannot guarantee 100% compatibility
with all USB storage devices.
External input AUX IN
1. Attach the audio cable to the AUX IN connector and connect the other end to the music source, e.g. to the
MP3 player.
2. Press repeatedly the button
FUNCTION
to select the AUX mode.
3. Use the volume buttons to set the volume of the device to a suitable level.
4. Use the controls of the connected device to control the playback.
Summary of Contents for CDR 1000
Page 2: ......
