![background image](http://html.mh-extra.com/html/ecg/bts-k1/bts-k1_instruction-manual_531285030.webp)
GB
GB
30
Private call
Press
4
or
5
to switch between speaker and phone during a call.
Reject an incoming call
Long press
2
to reject an incoming call.
4) Disconnect an existing Bluetooth connection
The speaker will automatically pair with the last known Bluetooth device. Long press
2
to disconnect
from the current Bluetooth connection, the speaker will indicate “Device disconnected”. The speaker is
then ready to be paired with another device.
3. Voice guide
Once enabled, the speaker plays information regarding the current playback mode, e.g.: Bluetooth mode, Aux
in mode, device paired, device disconnected etc.
4. TWS (Stereo playback)
Turn ON two BTS K1 speakers and switch both into Bluetooth mode.
Short press
6
on one of the speakers to begin searching the second BTS K1 speaker. During the search a beep
sounds and the speaker LED flashes alternately orange and blue. Both speakers are automatically paired. After
a successful pairing of the speaker that plays the left channel, the LED flashes blue and on the speaker playing
the right channel the LED is orange.
Next, enable Bluetooth on your mobile phone or other player and initiate the search for Bluetooth devices. “BTS
K1” appears, connect the speakers. When the left channel speaker is connected, it announces “Device paired”
and the LED will stop and will light up blue. You can then begin playing music on the Bluetooth speakers in
stereo mode.
Both paired speakers can be disconnected from your mobile phone/player by short pressing
6
. The speaker
will indicate “TWS disconnected”.
Long press
6
on any of the speakers to disable TWS. The speaker will indicate “TWS Cleared”.
Note:
1. Two adapters are required for powering the speakers, one adapter for each.
2. Before pairing the speakers to use the TWS feature, none of the speakers must be paired with any other
device. After pairing, the indicator on one of the speakers lights up blue and the other orange.
3. If either of the two speakers is paired with another BTS K1 speaker, you must first unpair this connection;
otherwise you will not be able to pair the speaker. Long press
6
on each speaker to delete the existing
TWS connection.
5. Playing music from micro SD card
After inserting your Micro SD card into the speaker, short press
1
to switch the speaker into memory card
playback mode and play music directly from the Micro SD card. The speaker will indicate “Memory card mode”
before playing.
Note:
In the memory card playback mode you select next/previous folder by pressing the button
4
/
5
briefly
twice.
6. AUX IN mode
Connect the speaker to an audio source (PC, MP3MP4, mobile phone) via 3.5mm audio cable. Short press
1
to
enter “AUX IN” mode (speaker indicates “AUX IN”). Music begins to play from the audio source.
Notes:
•
If you are connecting the speaker to a computer with a 3.5 mm audio cable, we recommend using
a genuine adapter (5 V / 1 A) to charge the speaker instead of the computer USB port. Powering the device
from the computer may be insufficient.
•
Short press
3
to lower the music volume. The source of music continues to play the music at a lower
volume.