WIRELESS THERMOMETER
19
GB
QUICK START
1. By sliding open the battery cover in the back of your wireless thermometer clock.
2. Insert two AAA batteries according to +/- polarity signed in the battery compartment.
3. Put on the battery compartment cover back. Within several minutes, the LCD shows default time, date,
and actual indoor temperature. Searching of the outdoor temperature sensor starts.
4. Insert two AAA batteries into the wireless outdoor temperature sensor. Outdoor temperature is shown
as “CH1” in the lower LCD-display line. The weather forecast station assigns Channel 1 to the outdoor
temperature sensor and shows actual outdoor temperature.
SET UP DIARY, 12/24 H TIME INDICATION
1. Press and hold
SET. ALM
button for 2 sec.; time changes to “2008 YR” and flashes.
To set year, press
v
/
V
.
2. Then press
SET. ALM
button again, month figures flash. To set month, press
v
/
V
.
3. Then press
SET. ALM
button again, day figures flash. To set day, press
v
/
V
.
4. Press
SET. ALM
button again, hour figures change into “24 Hr” format. To switch between “12 Hr” and
“24 Hr” display format, press
v
/
V
. After “12 Hr” selection, AM / PM icon is shown.
5. Then press
SET. ALM
button again, flashing “0:00” hour figures are show.
To set hour, press
v
/
V
.
6. Then press
SET. ALM
button again, minute figures flash. To set minutes, press
v
/
V
button.
7. By pressing
SET. ALM
button system returns to operating mode; if you do not press any button within
8 seconds, the device returns to normal mode automatically.
ALARM CLOCK SETUP
By pressing
SET. ALM
button, time figures change into alarm clock: “7:00 AL”. Press and hold
SET
.
ALM
button
for 2 sec, hour figures flash. To set desired alarm hour, press
v
/
V
button.
By pressing
SET. ALM
button, minute figures flash. To set desired alarm minutes, press
v
/
V
button.
By pressing
SET. ALM
again, figures change into flashing “05”. To set snooze time between 1 and 20 minutes,
press
v
/
V
button.
By pressing
SET. ALM
button, system returns to operating mode; if you do not press any button within
8 seconds, the device returns to normal mode automatically.
ALARM CLOCK TURN ON AND OFF
By pressing
SET. ALM
button, alarm clock setup is shown. To turn on / off daily alarm hours, press
v
button.
While alarm is turned on, icon is shown between hour and minute figures.
SNOOZE FUNCTION USE
Once the set alarm time is reached, the device generates alarm sound. icon flashes.
1) To turn off alarm temporarily, press
SNOOZE
button; icon still flashes. Once the set the snooze time is
reached, the device starts to sound again.
2) To stop alarm sound, press
v
/
CHANNEL (ALM On-Off)
button; icon stops to flash and the device will
sound at the same time next day.
Alarm duration: 2 minutes.
TEMPERATURE DISPLAY IN °C OR °F
To show temperature in C or F, press
V
(°C/°F) button.
Minimum and maximum temperature display
To show maximum or minimum outdoor and indoor temperature, press
MAX/MIN
button in the device´s
back.
