![background image](http://html.mh-extra.com/html/ecg/ac-3010-c/ac-3010-c_instruction-manual_531239037.webp)
GB
GB
37
The appliance is designed to connect to a 12 V DC car socket (cigarette lighter), in a boat or a caravan, as well
as 220–240V mains power (if an MP 2500 converter is used, which can be purchased).
Warning:
If you wish to keep medication cold, make sure that the cooling power of the equipment is suitable
for the medication.
The pockets located on the outside sides of the car cool box serve as a storage space. Objects stored there are
not being cooled.
WARNING:
THE LARGE ZIPPER POCKET THAT COVERS THE MOTOR MUST BE LEFT EMPTY AND
OPEN DURING COOLING.
For easier access, the lid of the cooling bag is equipped with a small window for removing and inserting small
items and with an inside pocket for small items (e.g. medication).
Since during the cooling the humid air inside the car cool box condenses, you can find drops of water on the
inside of the bag in case of long-term cooling. It is a normal phenomenon, wipe the condensation with dry
cloth if necessary.
USING THE APPLIANCE
For hygienic reasons, wipe the inside space of the car cool box with a sponge slightly moistened with a mild
solution of dish detergent before first use. Then wipe the space with a sponge moistened with clean water
and dry it.
Warning:
Do not use abrasive sponges or cleaning powder. Do not wash the car cool box under running
water and do not immerse it in water.
Note about cooling:
The temperature inside the cool box drops about 11-15 °C below the outside temperature, if the outside
temperature is about 25°C.
1. Place the car cool box on a flat surface, which ensures enough free space for proper functioning of the air
vents.
2. Make sure that the food and drinks placed in the car cool box are suitable for cooling at that temperature
and
let them cool sufficiently before placing them in the device
. We recommend that you pre-cool
the car cool box for at least 4 hours to keep the food cooled to the required temperature for as long as
possible.
3. Connect the 12V DC power cable to the cigarette lighter socket or other 12V DC socket in the car. Use the
MP 2500 AC converter (not included) to connect to a 220–240 V mains socket.
4. Close the lid of the car cool box.
5. The car cool box starts cooling.
6. You can turn off the cool box by pulling the power cable out of the socket.
Warning:
In most types of cars the ignition must be switched on to have power in the cigarette lighter.
Power saving tips
Choose a well ventilated place that is protected against direct sunlight.
Do not open the lid more often than necessary.
Clean the car cool box regularly.
Open the car cool box only for as long as necessary. Use a window in the lid to insert or remove small items.
CLEANING AND MAINTENANCE
Always unplug the power cable from the cigarette lighter or an outlet before any cleaning or maintenance!
Wipe the inside/outside of the car cool box with a sponge slightly moistened in a weak solution of dish
detergent. Then wipe the inside/outside with a sponge soaked in water and dry.