GB
39
the room without assistance, unless proper supervision is
available.
Do not immerse in water!
INSTALLATION
Please make sure that the package contains all the parts needed to assemble the radiator. Contact your vendor
if this is not the case.
Package contents:
1. Oil filled radiator 1 pc
2. Stand with wheels: 2 pcs
3. Threaded stirrup to attach the base: 2 pcs
4. Wing nuts: 2 pcs
Always unplug the power before handling the device to prevent electric shock.
WARNING
Do not operate the radiator without the base
attached. Use the radiator always only in the upright
position (wheels on the bottom, controls at the top).
Any other position is dangerous.
Installation requirements
Place the radiator on a flat surface that provides sufficient free space for proper venting.
The distance between the device and the closest wall must be at least 90 cm
.
WARNING
To prevent the device from overheating, do not
cover the radiator.
The radiator must not be placed directly under an
outlet.
The surfaces marked in this way become hot during use.
DO NOT COVER!
WARNING
Some parts of this product might become very hot
and cause burns. You have to pay special attention in
the presence of children or disabled persons.
Mounting bases
1. Thread the bent end of the stirrup through the opening in the base with the wheels (Fig. 1).
2. Insert this assembly on the bottom of the radiator between the ribs and push the stirrup downwards
(Fig. 2, 3).
