![background image](http://html.mh-extra.com/html/ecg/32-led-614-pvr/32-led-614-pvr_instruction-manual_531174055.webp)
55
GB
Inserting the batteries
1. Open the back cover of the remote control.
2. Insert two batteries (AAA) 1,5 V. Pay attention to correct polarity of
the batteries.
3. Close the cover of the battery space. If you do not use the TV for
a long period of time, remove the batteries from the remote control.
If the remote control does not work properly, check the following points:
•
Make sure that the power supply is working and that the plug is
properly inserted into the outlet.
•
Make sure that the TV set is on.
•
Check if the polarity of the batteries in the remote control is correct.
•
Check if the batteries are not empty.
•
Make sure that the sensor of the remote control is not overwhelmed
by fl uorescent light, direct sunlight or another source of intense
light.
Basic operations
On / Off
•
Insert the plug of the power cord in the electrical outlet.
•
Using the switch, turn on the TV power supply and press the button of the standby mode to turn on the
TV set.
•
Press the standby button again to switch off the TV set into standby mode.
Note:
When you turn off the TV set using the switch, do not turn it on again immediately; wait at least 1 minute
before using the switch again.
Standby mode
Press the standby button
1
to turn on the TV set.
Press it again
1
to switch it into standby mode. The power supply indicator will be red.
Do not leave the TV turned off for long time in standby mode. If you will not use the TV set for a long time, turn
it off using the switch.
Input mode selection
This device allows to receive signal from various sources. Press SOURCE repeatedly to select required signal
source.