7
CARE AND CLEANING
1.
Remove the shelves and pockets from the cabi-
net and door. Wash them in warm soapy
dishwashing water; rinse in clean water and dry.
2.
Clean the inside with a cloth soaked in warm
soapy dishwashing water. Then, use cold wa-
ter to wipe off soapy water.
3.
Wipe the exterior with a soft cloth each time it
is soiled.
4.
Clean the Magnetic door seal with a toothbrush
and warm soapy dishwashing water.
5.
Whenever the refrigerator is moved to clean or
repositioned, the Evaporating pan should be
removed and cleaned.
Evaporating pan;
How to remove
Move the Evaporating
pan to the left to pull it
toward yourself.
Set the Evaporating pan
so that the two protru-
sions on the machine
come through its corre-
sponding holes, and
move the pan to the
right.
How to set
NOTE:
When cleaning all plastic
parts inside this refrigerator,
only use diluted dishwashing
liquid(soapy water). Make
sure that all plastic parts are
thoroughly rinsed with water
after cleaning.
Please pay attention to
the safety since the
compressor is very
hot.
Make sure the back
end of the Evaporating
pan rests securely on
the rail. Otherwise wa-
ter will leak.
• Do not use polishing powder, benzine, hot wa-
ter etc.
• If undiluted detergent is used or soapy water
is not wiped off thoroughly, cracking of plastic
parts can result.
• Wipe any food oils adhered to plastic compo-
nents as they can cause cracking of the plas-
tic surface.
Switching off your refrigerator
If you switch your refrigerator off when you are
going away for an extended period, remove all food,
clean the interior thoroughly. Remove the power
cord plug from the power socket and leave all doors
open.
Evaporat-
ing pan
Compressor
Protrusion
Hole
Evaporating pan
Protrusion
Evaporating
pan
Rail
Hole
Some household cleaning chemicals may affect
the inside surfaces and plastic shelves result-
ing in splitting or cracks occurring.
Replacing method of the lamp bulb
1.
Unplug the refrigerator
first to prevent electric
shock.
2.
Remove the light cover.
3.
Replace the lamp bulb
with the same type.
Light cover
base E12, MAX 10W, T-20