Charging
Charger
Use a 5V/1A charger with USB A socket to charge internal battery.
ON/OFF
The UPL24 will only charge when
ON/OFF
switch is in the
OFF
position (switch down).
In the
ON
position (switch up) charger is completely disconnected from internal battery.
Cable
Use a thick and not too long
USB A
to
USB B
cable to charge the internal UPL24 battery.
Use a thick and not too long
USB A
to
USB mini B
cable to charge the internal RC battery.
Info
Studies have shown that a rechargeable battery lasts longer when charging regularly and
frequently, discharging completely before charging reduces the battery life.
Replace
battery
If battery needs to be replaced make sure that it is the same type, the battery installed in the
UPL24 has build-in protection circuit (PCM) that prevents over charging and short circuit
currents.
Batteries without this protection circuit should not be used in the UPL24
(fire hazard)
RC
The battery in the remote control can be charged using a
USB A
to
USB mini B
cable and a
5V/A1 charger with USB A socket.
If the UPL24 does not respond to the RC then you need to re-charge the RC.
You can also the use RC when the RC is being charged.
UPL24 USER GUIDE
5
