ECdesigns PowerDAC-B User Manual Download

Page: 15 / 15

https://www.ecdesigns.nl

15 15

piCorePlayer

If you are looking for simple music player for stand-alone or even multi-room to use with the PowerDAC-B
checkout piCorePlayer.

When run from an RPI4 you could connect your music to the RPI4 directly by USB or to NAS via network.

By using the JustBoom Digi HAT or the HifiBerry Digi(+) HAT you can connect the PowerDAC-B

using a Toslink cable.

It supports 44.1kHz / 48kHz / 88.2kHz / 96kHz / 176.4kHz / 192kHz.

Be sure to set Audio Volume Control to fixed at 100%, set Audio Crossfade to No, Volume gain to None.

Then install “Material Skin” in LMS and choose in LMS pages under “Web Interface” and you will have a very
nice user interface using any browser on any PC in your network.

Use Deezer and Tidal.

Through plugins you can also use Spotify and Qobuz

For more info see:

https://www.picoreplayer.org/landingzone_option3.html

Summary of Contents for PowerDAC-B














Search results

Summary of Contents for PowerDAC-B

Reviews:

Related manuals for PowerDAC-B

Brands by name

Popular brands

ECdesigns PowerDAC-B, User Manual

Search results

Summary of Contents for PowerDAC-B

Reviews:

Related manuals for PowerDAC-B

Brands by name

Popular brands