Page 5 of 16
2017 & 2019 DODGE RAM SERIES
The Running Board lights for the 2017 & 2019 Dodge Ram Series fit under the vehicle’s rocker panels and provide a lateral facing signal
from the side of the vehicle.
Step 1.
Mount the brackets to the light unit using the provided screws (See Figure 1).
Step 2.
From under the vehicle: Test fit the provided brackets to achieve the location needed for the mounting hole on the vehicle. Mark all
four (4) hole positions needed.
Note: Position brackets to avoid cutouts in pinch weld for jack clearance.
Step 3.
Drill the mounting holes into the vehicle using a #34 drill bit.
Step 4.
Using the provided screws, mount the bracket to the vehicle using mount shown in Figure 2.
Step 5.
Repeat the process for the opposite side running board.
Step 6.
Route the lights wiring as desired.
Note: Instructions are made using Driver’s Side as example. To Reproduce results, revisit each step for Passenger Side.
Installtion and Mounting Instructions:
Figure 2
Figure 1
