Page 4 of 5
Troubleshooting:
Symptoms
Possible Causes/Solutions
Solutions
No reaction from the system while the
gear is switched to reverse.
No power input.
Check whether the power cable is se-
curely connected.
No reaction on display while there are
obstacles within the detecting area.
Improper connection of the sensor or monitor.
Check whether it is loose in connection.
There is no obstacle within the detect-
ing area, but constant warning and
voice prompt occurs.
There may be too much dirt in sensors and leads
interference.
Clean the sensors.
There is no obstacle within the detect-
ing area, but fixing distance is shown
on screen.
The distance from the ground is detected.
Adjust the angle of sensors.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Declaration of conformity:
Description
Part No.
Replacement Sensor System (Includes speaker, control box, sensors and cable)
EC1004-SK
Speaker for Sensor Kit
EC1005
Control box for Sensor Kit
EC-CB04
Sensors with Cable (qty. 4)
EC-RS04
Power cable for Sensor Kit
PC-1004
Replacement Parts/Accessories