Battery Installation :
1.
Please install 3AA batteries.
2.
Please replace batteries when you see the low battery indicator.
Band switch :
Press the Band Switch button (3) to select different band in the following order : FM – MW – SW1 –
SW2 .
Search Stations
Manual Search :
1.
Turn on the radio
2.
Select the band
3.
Press Up Search(15) or Down Search (17) until you locate the station.
Auto Search :
1.
Turn on the radio
2.
Select the band
3.
Long press Up Search (15) or Down Search (17) until it stops at the next station
4.
Press (15) / (17) if you would like to stop the searching process
Direct frequency input :
Under the listening mode, press the FREQ INPUT (18) button once. Press numbers pad to enter the
desired frequency. The LCD will display your selection. Press FREQ INPUT (18) again to confirm.
Examples :
1.
FM 99.3 MHz : Select FM, then FREQ INPUT. Press 9-9-3 and then FREQ INPUT again.
2.
MW 999 KHz : .....Press 9-9-9……
3.
SW1 6.84MHz : ……Press 6-8-4……
4.
SW2 15.195MHz : …..Press 1-5-1-9-5…..
Memory Presets :
1.
Use auto, manual or direct frequency input to locate the station.
2.
Press the MEM (13) button , the LCD indicator will blink.
3.
Press 0-9 within 5 seconds. The station will be stored in CH0-CH9
4.
When new frequency is selected , the old memory will be erased.
