Ebyte Z2530-2G4-20, User Instruction Manual

Page: 7 / 33

7
4. Function module
4.1. Operating mode
Mode Node type Description
Data communication
display mode
Mode 1
（ Transparent
mode ）
Coordinator Serial data will be transmitted to modules not in sheep by broadcasting.
Data format can be
configured by command
：
1 Display Mac address of
transmitter
2 Display Mac address of
transmitter
3 Display RSSI value of
message shortest path
（ Display mode can be
configured to no display,
one mode display or
multiple modes display
）
Router
Serial data will be transmitted to coordinators by point to point.
(Note: Terminal can not receive the data in
sleep mode )
Terminal
Mode 2
（ Half-transpa
rent mode ）
Coordinator
Data will be transmitted according to the fixed format protocol of data
transmission, There are point to point, broadcast, multicast transmission
ways.
Please refer to “H EX data communication description “ for details.
Router
Serial data will be transmitted to coordinators by point to point.
Terminal
Mode 3
（ Protocol
mode ）
Coordinator
Data will be transmitted according to the fixed format protocol of data
transmission, There are point to point, broadcast, multicast transmission
ways.
Please refer to “H EX data communication description “ for details.
None
Router
Terminal
Note ： User can only operate Mode 3 to configure GPIO function. Communication between arbitrary modes can communicate with each other
and not affect each other 。
4.2 Brief introduction of protocol mode
No. Mode Description
1 Broadcast
User can broadcast on the whole network according to command when connecting network (3 modes):
1
、 Mode 1 —— Broadcast to all modules.
2 、 Mode 2 —— Broadcast to modules in the receiving mode (except sleep mode).
3 、 Mode 3 —— Broadcast to full function modules (Coordinator and Router).
2 Multicast Multicast to all modules (not in sleep mode) when connecting network.
3
Point to
point
Module can communicate with other devices by short address according to command when connecting network (3
modes):
1
、 Transparent transmission —— no information
2 、 Short address —— the information is short address
3 、 Mac address —— the information is MAC address
Notes: Please refer to “H EX data communication description “ for details.