background image

Chengdu Ebyte Electronic Technology Co.,Ltd.

ESP32-C3-MINI Dev. Board User Manual

Copyright ©2012, Chengdu Ebyte Electronic Technology Co.,Ltd.

7

3 Program Burning Guide

Before powering on, make sure the ESP32-C3-MINI-1-TB &

ESP32-C3-MINI-1U-TB are intact.

Tools to prepare: ESP32-C3-MINI-1-TB or ESP32-C3-MINI-1U-TB, USB 2.0

cable (Standard A to Micro-B , computer -Windows, Linux or macOS. Please

make sure to use Appropriate USB cables, some cables are for charging only, not

for data transfer and programming.

Connect the USB data cable, and burn the program from computer software;

4 Revision History

Version

revision date

Revision Notes

Name

1.0

2022-10-27

initial version

Hao

Contact US:

Technical support:

[email protected]

Documents and RF Setting download link:

https://www.cdebyte.com

Thank you for using Ebyte products! Please contact us with any questions or suggestions:

[email protected]

------------------------------------------------------------------------------------------------------------
Fax: 028-64146160

Web:

https://www.cdebyte.com

Address: B5 Mould Industrial Park, 199# Xiqu Ave, High tech Zone, Chengdu, Sichuan, China

Summary of Contents for ESP32-C3-MINI-1









Reviews: