Chengdu Ebyte Electronic Technology Co., Ltd. E90-DTU(900SL22-4G)Usermanual
Copyright
©
2012
–
2019,
成都亿佰特电子科技有限公司
10
4.
Switch from "4G/2G Network Transparent Transmission" to "RF Transmission", and the model information will be
displayed in the message box on the right side. Then users can configure the RF parameters. After the configuration
is complete, click the "Save RF Parameters" button. After completion, as shown below:
5.
After the parameter configuration is completed, if the parameters in the "4G/2G network transparent transmission"
mode are modified, you need to click "4G/2G network transparent transmission" mode again, click the "module
restart" button to make the modified 4G/2G parameters take effect and automatically enter the communication state;
if the parameters in the "4G/2G network transparent transmission" mode are not modified, then you do not need to
click the "module restart" button, and directly click "Enter communication state" button. After completion, as shown
below:
Summary of Contents for E90-DTU
Page 1: ......
