E78-864LN22S
25
+CLINKCHECK:Y0
，
Y1
，
Y2
，
Y3
，
Y4
YO indicates the Link Check result:
0 - indicates that the Link Check is successfully executed.
Not 0 - indicates that the Link Check execution failed.
Y1 is DemodMargin
Y2 is NbGateways
Y3 is the downstream RSSI
Y4 is the downstream SNR
Return
value
description
<value>: Enable control for Link Check
0 – Link Check is not enabled
1 – Perform a Link Check
2 - The module automatically carries the linkcheck command in each
upstream packet.
Return OK, the setting is successful.
If X1=1, after waiting for a while, it will return the second response message
in the following format:
+CLINKCHECK:Y0
，
Y1
，
Y2
，
Y3
，
Y4
YO indicates the Link Check result:
0 - indicates that the Link Check is successfully executed.
Not 0 - indicates that the Link Check execution failed.
Y1 is DemodMargin
Y2 is NbGateways
Y3 is the downstream RSSI
Y4 is the downstream SNR
AT+CLINKCHECK=1
OK
+
CLINKCHECK: 0
，
0
，
1
，
-68
，
8
Example
Precautions
Need to set before sending data
Command
character
Command
Type
Command Format
response
CRXP
(
Set the receive
window
parameters
)
Test
command
AT+CRXP=?
+CRXP:
“
RX1DRoffest
”
,
”
RX2DataRate
”
,
”
RX2Frequency
”
OK
Setting
command
AT+CRXP?
+CRXP:<RX1DRoffest>,<RX2DataRate
>,<RX2Frequency>
OK
Parameter
Description
AT+CRXP=<RX1DRoffest>,<
RX2DataRate>,<RX2Frequenc
y>
OK
Return
value
description
<RX1DRoffest>,<RX2DataRate>,<RX2Frequency> See the Lorawan
protocol for details.
