Chengdu Ebyte Electronic Technology Co,;Ltd
E70-868T30S user
manual
Copyright
©2012–2019
，
Chengdu
Ebyte
Electronic
Technology
Co,;Ltd
13
6. Operating Mode
The table below shows the status of corresponding modes:
Mode (0-7)
M2
M1
M0
Mode introduction
Remark
0 RSSI mode
0
0
0
UART opens. Wireless closes and
transmission is unavailable.
Module outputs RSSI value each
100ms through UART
1 Continuous mode
0
0
1
UART opens. Wireless closes and
continuous transparent transmission is
available.
Air data rate can be adjusted
automatically according to baud rate.
The baud rate must be same on both
receiver and transmitter. It is
applicable for high speed continuous
data transmission.
2 Sub-package mode
0
1
0
UART opens. Wireless closes and
sub-package transparent transmission is
available.
Air data rate and baud rate can be
adjusted separately. It is applicable
for data packet transmission.
3 Configuration mode
0
1
1
UART opens. Wireless closes and
parameter can be configured.
Baud rate is fixed as 9600 8N1.
4 WOR mode
1
0
0
UART opens. Wireless closes and
sub-package transparent transmission is
available.
Receiving is not available under this
mode. Preamble code will be added
proactively before transmission to
wake up the receiver under mode 6.
5 Configuration mode
(Same as Mode 3)
1
0
1
-
-
